Cold storage is a kind of refrigeration equipment, which refers to the use of artificial means to create an environment different from the outdoor temperature or humidity. It is also a constant temperature and humidity storage equipment for food, liquid, chemical, pharmaceutical, vaccine, scientific experiments and other items. Cold storage is usually located near the shipping port or the place of origin. The cold storage is mainly composed of several parts: the storage body, the refrigeration system, the cooling system, the control system and the auxiliary system. Compared with refrigerators, the cooling area is larger and has a common cooling principle. Cold storage can be divided into fresh storage, refrigeration storage, and quick-freezing storage according to the use. The temperature of the fresh-keeping storage is +3~+5°C, which is often used to keep vegetables and fruits fresh. The temperature of refrigeration storage is -20~-18° […]

Water chiller is a refrigeration device that provides constant temperature, constant flow, and constant pressure cooling water. It absorbs indoor heat by circulating the refrigerant in the refrigeration system and releases the heat outdoors through the coolant. Water chiller is different from general water cooling equipment in that it has a completely independent refrigeration system that is never affected by gas temperature or the environment. The water temperature can be adjusted and controlled, thus achieving high-precision and high-efficiency temperature control. The water chiller is equipped with an independent water circulation system, and the water inside the chiller can be recycled to save a lot of water. The working principle of water chiller is based on a refrigeration cycle, usually consisting of four main components, including a compressor, condenser, expansion valve, and evaporator. The following is a brief description of t […]

Summer is approaching, today I will recommend a summer resort – Ice and Snow Park. In the ice and snow park, there are ski resorts, ice rinks, curling rinks, ice sculpture exhibition areas, snow falling areas, parent-child interaction areas, etc. Here, you can not only avoid the high heat, but also experience the fun of ice and snow. Focusun provides a complete set of indoor snow park construction services. In addition to the park construction, we can also provide services such as project background analysis, financial calculation, risk control and prevention. Next, I will give you a specific introduction to the construction of the project: Firstly, the project site selection is based on the principles of ecological and environmental protection, strong operability, venue safety, and there are many consumers in both the Eastern and Summer seasons; The site selection conditions are an area of 4000 square meters or more, with few ind […]

The emergence of ice machines has brought many conveniences to life, but the variety of ice machines is limited and cannot meet the needs of all customers. Focusun, a leading ice maker brand with nearly a century of glorious history, continuously innovates and brings European products and lifestyles that are simple, environmentally friendly, and full of design to the Chinese market. This time, Focusun set off again with his newly developed product, the slurry Ice Machine, with a firm attitude towards the established goals. How much do you know about slurry ice? Slurry ice is an aqueous solution containing suspended ice crystal particles. Research has shown that the cooling energy of slurry ice is 4-8 times higher than that of cold seawater, and its cooling capacity is 1.8-4.3 times that of cooling water. When cooling aquatic products, slurry ice has a higher cooling rate compared to traditional flake ice, which means cooling fish of the […]

Location: The ice maker should be placed in a well ventilated and temperature appropriate location, not in direct sunlight or near heat sources. Check the power supply: Check whether the power cord of the ice maker is grounded, whether the plug is secure, whether the wire is aging, and whether the power switch is normal. Operation method: Follow the instructions of the ice maker manual, do not overload, do not adjust the cooling temperature and ice making time arbitrarily, otherwise it will affect the lifespan and ice making effect of the machine. Attention to safety: The ice maker may generate high temperatures and pressures during operation. Do not open the machine or damage the sealing structure of the machine to avoid danger. Storage method: When not using the ice maker for a long time, the water tank should be emptied, the power cord should be unplugged, and a dry and ventilated environment should be maintained to avoid being affec […]

1、 Installation requirements for assembled cold storage 1. Collect materials from the accessory warehouse according to the engineering design and construction material list, and carefully check the materials and accessory models. 2. Before installing the cold storage, check the quantity of cold storage boards according to the shipping list. When loading and unloading the warehouse board, handle it with care, and lay anti-scratch layers on each layer of the warehouse board and the ground joints. 3. When assembling the cold storage as a whole, there should be gaps between the cold storage and the wall and roof. The ground or bottom plate must be horizontal, and the construction environment should be clean. 4. Before fixing the interior of the library with angle aluminum, it should be sealed with glass glue, and then fixed with angle aluminum by solid pulling and mortising. The spacing between pull rivets is 300 mm. The distance between th […]

Focusun has always focused on how to produce snow that is close to natural snow, safe, non-toxic, low power consumption, and resistant to sliding and weathering. Through continuous efforts, high-temperature snow making system has been developed. Focusun’s high-temperature snow making equipment is not afraid of ambient temperature, air humidity, and inlet water temperature, breaking through the limitations of various environmental factors, and can make snow at a maximum temperature of 35 ℃. The snow produced is also easy to maintain its quality over a long period of time, and is resistant to sliding and weathering, making it more suitable for resisting sublimation and the impact of heat from light sources than natural snow. The high-temperature snow making system uses a ice flake crushing snow maker, using ice flakes as raw materials to make snow. The produced sheet ice is crushed into powder through an ice crushing device, and powdery i […]

Many people want to buy ice machines, but they don’t know how to choose. Today, I will show you how to choose a satisfactory ice maker. When purchasing an ice machine, the following aspects should be considered: 1. Type of ice: different types of ice machines produce different shapes of ice, so ice makers should be selected according to the use of ice. For example, flake ice has no sharp edges and corners, and will not damage the external surface of the frozen object, so it is mainly used in seafood, aquatic products, food processing, etc. 2. Capacity: according to the amount of ice required, select the appropriate size of ice machine specifications to prevent the production of ice cubes from being insufficient or causing unnecessary waste. 3. Energy efficiency: When selecting an ice maker, be sure to ask clearly about the energy efficiency of the ice maker. An ice maker with high energy efficiency will greatly reduce energy costs […]

There are many kinds of ice machines, and the most common one in daily life is cube ice machine. The cube ice machine is safe, efficient, energy-saving, durable and environmentally friendly. It is suitable for convenience store, cafe, milk tea shop, bar, banquet hall, fast food restaurants, and hotels. The shape of cube ice is square, and the size can be selected according to the needs. In addition to the cube ice machine, there are also options for snowflake ice machine, bullet ice machine and moon ice machine. Features of cube ice machine: 1. Adopt hot fluorine to doff ice, so the speed is fast. The whole ice-doffing process only takes 150-180 seconds; 2. Add the deicing drainage function, and drain the remaining water in the cold water tank instantaneously during deicing to make the ice cleaner and transparent; 3. The compressor imported from Europe and America has good performance, low noise and high reliability; 4. The machine head […]

Today, we will introduce the ice crusher, which can turn ice into small ice particles to meet people’s needs. For example, you bought an ice breaker, but you want to use it to freeze and keep fresh food. However, large block ice can not be well contacted with seafood in a large area, which requires ice crushing. After being processed by the ice crusher, large pieces of ice can become fragmented ice. Working principle: The power supply drives the motor to run, and the rotating motor drives the blade to start rotating at high speed, thus turning the large block ice into clastic ice. Features of ice breaker:  1.High quality ice crusher meets different ice crushing requirements. 2.The ice cubes after secondary ice crushing are more widely used. 3.Modular design makes operation safer and faster. 4.Made by SUS304, the ice crushing process is sanitary and safe. Model selection: There are two common ice crusher, one is tube ice crusher, a […]